1. Home
  2. Tools
  3. Jack-knife diagram

Jack-knife diagram tool: find your chronic and acute failures

Paste failure codes with their count and mean time to repair, and the tool draws a jack-knife diagram that sorts downtime into chronic, acute, and acute and chronic failures. Download the diagram as a PNG and the table as CSV. Free.

Jack-knife diagram

Failure codes

Runs in your browser. Nothing you enter is sent to a server or stored.

How to use it

Paste the data from a spreadsheet, or type it, with three columns: failure code, count (how many times it occurred in the period) and MTTR (mean time to repair, in hours). The diagram updates as you type. Codes that appear on more than one line are combined, with repair times weighted by count.

Hydraulic Systems,1233,4.18
Final drive,14,96

How to read the result

A jack-knife diagram plots each failure code by how often it happens against how long it takes to repair, on logarithmic scales, so lines of equal downtime run diagonally across it. Two limits split it into zones: the acute limit is the mean time to repair across all failures (total downtime divided by total failures) and the chronic limit is the mean number of failures per code. Zones: chronic (frequent and quick to fix, a reliability problem), acute (rare and slow to fix, a maintainability problem), and acute and chronic (both, the first priority). The tool’s tables give the number of codes and the downtime in each zone, and rank the codes by downtime.

51020501001251020Acute and chronicAcuteChronicMotorHydraulicsBrakesTyresElectricalBucketTransmissionCabNumber of failuresMean time to repair, hours
Frequent and slow to fix comes first. A Pareto chart ranks by downtime alone; this shows which failures are both. Example data.

What to do with the numbers

How to create a jack-knife diagram for downtime analysis

The method in Excel, and why it beats a Pareto chart.

Reliability engineering

Find out why the acute and chronic failures keep happening.

Maintenance strategy

Turn the chronic failures into tasks and intervals.

Questions people ask

Why use a jack-knife diagram instead of a Pareto chart?

A Pareto chart ranks failure codes by total downtime and hides whether it comes from many short stops or a few long ones. The jack-knife diagram shows both, which tells you whether to work on reliability, maintainability or both.

What data does it need?

For each failure code, how many times it occurred in the period and its mean time to repair. A CMMS export of work orders grouped by failure code gives both.

Can I use the diagram in a report?

Yes. Download the diagram as a PNG and the table as CSV, and cite the period the failure data covers.

Miguel Pengel, principal engineer, Pardus Consulting

Who built it

The tool was built by Pardus Consulting and uses the same methods the firm applies on client work. When the question is bigger than a calculator, the analysis is run on your own CMMS data and signed by a registered professional engineer.

Discuss your project About Pardus

Discuss a project with Pardus.

Outline the plant, the assets or the question. An engineer will make contact to arrange a scoping discussion, and a written proposal follows once the scope is agreed.